You will no longer receive e-mail notifications from this forum.
Log-In to post
Contact Support on Twitter
I recently published an automation script that included an HTML email template. Seems it didn't get copied over.
I've published my first script to the server. I noticed that I must use my AD network credentials as the server runs on an account that can't access the network shares.
How does the server handle when users must change their network password? Obviously, making changes to the amount of scripts we run isn't a valid option.
Any help/thoughts on this situation would be appreciated.
Hi, I have an automation script published on TIC, that uses an export activity which runs an excel macro after the sql export.
macro does a calculation which is , multiply value in cell D4 with 100. This calculation happens in the file created during run time but every time this script runs it retains multiplied value from the previous runs, which should not happen as multiplication happened during the run time and the orginal file value should not be multiplied and saved.
This happens if I run script multiple times on the same date:
so for example let's assume initial value in cell D4 is 1, after first run on 1/4/2017 it will become 100, after second run on 1/4/2017 it will be 10000, after third run on 1/4/2017 it will be 1000000
however on 1/5/2017 it will again be 100 after first run ,10000 after second and so on.
My understanding is all these files are created during run time and any calculation during the execution of macro,should not affect the original xlsm file
Is there a way to install TIC 4.3. without having IIS 8.0 in the process ?
When using a View in TIC as datasource in a Tableau workbook I constantly get the error that:
Error: You 'have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ')) AND (SGBSTDN.SGBSTDN_MAJR_CODE_1 = STVMAJR1.STVMAJR_CODE(+))' at line 84
This seems to suggest that the MySQL server has trouble with the ANSI code for left outer joins (it's the '+' of the outer join syntax that the error indicates. Removing the '(+)' from the SQL simple shifts the error to the next '(+)' in that statement.
Meanwhile the dataset in the Tableau workbook seems to perform as normal.
Is there a way to gain access to TIC User information to use in an automation. For instance I would like to use 1 automation to return different results (using different run-time parameters for instance) based on the TIC User (or TIC Group the User belongs to) that is executing the automation in TIC. This would mean the difference between deploying 80 different automations shared with 80 different Users/Groups or 1 automation used by all. Basically, can I pass row-level security in an automation?
Is there a way to use the find and replace element of an automation on an artifact on TIC? Or should I design that automation on the TDP instance that is on the computer/server?
I'm trying to set up a view for someone that will Query another view in TIC. The second view queries the first view as a table with some extra filters/limits and allowing some parameters. I have not shared the first view with other users but did share my database credentials with users of that view, for the second view I allow the user I share that view with to use my credentials to access the first view.
I want to emulate a type of row level security here on a view, that is also used for a mix of other reports. The results is however an error:
Error Cannot download data for view TIC_Demo.testview. SELECT command denied to user 'sfas'@'localhost' for table 'by_major_using_view'.
What did I miss here? logically the shared credentials in both views should allow this second view to work for whomever I share it with?
How can I get an emailed report of all scripts each day? I've been having to view manually and would like to save some time.
I have several automations published on TIC currently. Most follow the process of running one or more queries, export the data to a single Excel file, then call an Excel macro within that file which further summarizes the data and sends out an email (using CDO messaging). To date, all of the other automations of this type have worked successfully.
This latest one, however, starts the update process by running three queries, and exporting the data to the Excel file. This works fine. Then the process does not move forward - the excel file is left open indefinitely (I have to end the Excel process with the Task Manager) - it does not appear that the macro is ever initiated, as even the first statement is not executed.
This same automation has worked fine many times when I run it on my desktop, but operates as noted above when published to TIC.
We have several Toad automations that are scheduled to run at various times throughout the day and are published to Toad Intelligence Central (TIC). These automations "push" reports with information to employees based on the schedule that we have set up. Some of these employees would also like the option to "pull" the reports on an adhoc basis - in other words at a time that is not already scheduled. For security reasons, we don't wish to give Toad access to all employees.
I guess what we are wondering, is it possible to send a set of instructions to the server where Toad Intelligence Central resides that would immediately run an automation that is already installed within TIC? The set of instructions would need to come from an employee that does not have access to Toad.
I figure that with all of the Toad users out there, that this question has already been addressed, but I didn't locate an answer yet on Toad World.
Thanks for your help.
I'm trying out TIC for the first time, but I'm running into an issue synchronizing our Active Directory with TIC. Is there a maximum limit on the AD size?
The first time I tried was through the TIC Server Properties > Active Directory (tab) > Sync Now. This ran for quite a few hours before finally failing with a 'Java Heap' message, and nothing else.
Instead of trying to do a full synchronization, I tried to add just specific users by going to Users & Groups > Add from Active Directory. I get a progress bar for a few seconds, and then the message "Failed to load Domain users and groups from Active Directory" and nothing else.
Are there any logs which might provide more information as to why TIC is failing to synchronize and/or load from AD?
I have an Automation script that is published on TIC. It basically uses an "Export activity" to get the export from a SQL query and then run the macro. If I run this autoamtion script from TDP it fires the macro, however if I publish this to TIC it does not fire the macro and just the import can be achieved, I have already "Enabled all Macros" ?
Any help is much appreciated?
P.S I am using Toad 3.7
It appears that anyone who adds themselves to the TIC server can expand the logs. In many of the logs, it is possible to see he SQL query that was used within the script.
I don't want to set the log to anything other than verbose - diagnosing issues is a high priority.
I downloaded and tried to upgrade all 3 pieces of the TIC Server. Toad Intelligence Central and Admin Console upgraded.
The Web Server however, fails and now there is no web access to the server.
I've tried rebooting server.
The error in within a cmd popup window very soon after starting that portion of the install. It say it fails to extract files.
The web server is now saying the 'site can't be reached' so this is a big issue.
Any known issues?
When connecting to the TIC server from TDP today, I got information that I should upgrade to 3.3. I don't see any information about this anywhere on this site.
I have remoted in to our TIC server, and have opened the TIC admin console. I am then attempting to connect to the TIC server, and receive the following error:
Error connecting to the Intelligence Central server "root@localhost", java.util.ConcurrentModificationException
Any ideas on how to fix this?
OK - last one for today....
When I have published a new script, and it runs, sometimes it just clocks until I have to cancel from TDP. I tried looking for a log file to determine what the issue is.
There is non on local machine for TDP. Is there something I can check on server that will tell me where the script was at when it started clocking/failed?
How to you add a non Active Directory user to server? I don't seem to have that option.
(I had originally posted this on the IBM db2 forum)
I am attempting to join 2 Toad Intelligence Central tables with an excel (97-2003 version) spreadsheet in a query. The query opens with no issues, but when I try to execute it, I encounter the following error: "Missing MySQL ODBC Driver: To execute a Cross-Query that uses a Toad Intelligence Central connection you will need to install a MySQL ODBC Driver on this client."
I am able to execute the same query on the TIC server, so it doesn't appear to be an issue with the TIC server.
When I look at the ODBC Data Source Administrator on my desktop (where the query fails), the drivers tab shows 2 MySQL drivers: MySQL ODBC 5.3 ANSI Driver and MySQL ODBC 5.3 Unicode Driver. I tried uninstalling the MySQL drivers and installing the latest MySQL drivers with the same error.
I have run this query before (a month or so ago) on my desktop with no issues. I am currently using TDP 22.214.171.1246 and TIC 126.96.36.199 with no recent upgrades.