SQL Navigator Forum

dcaylor1
Follow / 16 May 2018 at 3:27pm / SQL Navigator

Exporting SQLNAV 7.3.0.4294 to Excel has DATE format issue and shows...

Expand content
(I'm new and tried to locate a post on this before posting, but didn't see any... sorry if this is a duplicate) Exporting SQLNAV 7.3.0.4294 to Excel has bad DATE format Format is "m/d...

(I'm new and tried to locate a post on this before posting, but didn't see any... sorry if this is a duplicate)

Exporting SQLNAV 7.3.0.4294 to Excel has bad DATE format

Format is "m/d/yyyy h:mm:ss \AmPm" but should be "m/d/yyyy h:mm:ss AM/PM" result is a value like "1/17/2018  12:00:00 AM" appears as "1/17/2018  12:00:00 A1P1"

I found mention of this on another forum where a competing product to SQL NAV also had the same problem, but I can't find any mention for SQL NAV.

Thanks

David

Unanswered 49 0 / Create an account to join the discussion.
W.S.
Follow / 7 May 2018 at 11:25am / SQL Navigator
Latest post by on 14 May 2018 at 2:33am

Have problem with Navigator 6.1 with Oracle 12 installation

Expand content
Good day all, I registered on this group only today - 7 May 2018.I never knew this group existed and only found it due to searching for problems I have with SQL Navigator 6.1 and 7.1. I have been using...

Good day all,

I registered on this group only today - 7 May 2018.I never knew this group existed and only found it due to searching for problems I have with SQL Navigator 6.1 and 7.1.

I have been using SQL Navigator since early 2000's since V3, and have the last few years been working on SQL Navigator 6.1. 

This worked fine for me for many years until our company recently installed Oracle 12. I have now issues with 6.1 in that I can not open, view or edit procedures and packages.

I would like to know what causes this, and is there a setting that can fix this ? (For V 6.1). 

When I attempt to open a package, I get this message : example

12:06:15 PACKAGE "PR_AM"."PKG_CALL_CITY_1" recreated
12:06:15 PACKAGE BODY "PR_AM"."PKG_CALL_CITY_1" not found

--------------------------

Then, in my attempts to get past this problem, our company had a V7.1 installation file, quite a few years old. I then installed V7.1. After my install the license was automatically upgraded from 6.3 as valid license, and I could work on V7.1. But I got many problems, and the nr one problem is that Navigator becomes unstable after I do almost nothing and prg crashes.

I then read up on Google and saw there were some similar problems with V7.1 release which were solved on later installations.

I now see V7.4 is available. I now want to install V7.4, but where do I get the installation files ? I do see the installation downloads on Quest website, but they require the client information and detail first, before I am allowed to download the software. I do not have this detail, as I do not know exactly and with what detail my company registered with Quest many years ago.

I just want the download file, preferably for 32 bit and 64, and I am quite sure our license will cover this upgrade. If not the software will tell me, and I can then pursue this further with our company.

------------------------------

I would have no problem carrying on with V6.1, if someone can tell me why I can not open procedures and package.

We do have licensed PL/SQL Developer as well that we use for development, but I am a big SQL Navigator fan.

Thank you for any help.

Unanswered 268 6 / Create an account to join the discussion.
villyen
Follow / 3 May 2018 at 9:35am / SQL Navigator
Latest post by on 4 May 2018 at 7:49am

SQL Navigator 7.4 XML editor

Expand content
Hi, When ever I try to save to file from the XML editor I get: 10:10:52 Access violation at address 753B5FB6 in module 'KERNELBASE.dll'. Read of address 11F71000 Running Windows 10. Any...

Hi,

When ever I try to save to file from the XML editor I get:

10:10:52 Access violation at address 753B5FB6 in module 'KERNELBASE.dll'. Read of address 11F71000

Running Windows 10.

Any ideas as to what might be causing this? 

Thanks

308 2 / Create an account to join the discussion.
syscureit
Follow / 28 Feb 2018 at 2:47am / SQL Navigator

DATABASE

Expand content
Hey Guys, I edited data value of a grid on a table with commit - but the edited (or changed value) doesn't appear on the actual web host. I mean, I edited a web value on database using SQL navigator...

Hey Guys,

I edited data value of a grid on a table with commit - but the edited (or changed value) doesn't appear on the actual web host.

I mean, I edited a web value on database using SQL navigator - after running the script(commit) the changed value didn't appear on the hosted webpage.

Please need an advice.

Unanswered 685 0 / Create an account to join the discussion.
DataSplit
Follow / 31 Aug 2015 at 10:59pm / SQL Navigator
Latest post by on 27 Feb 2018 at 1:48am

SQL and MySQL

Expand content
What product would I use if I wanted to connect to both SQL and MySQL databases?

What product would I use if I wanted to connect to both SQL and MySQL databases? 

Unanswered 3411 3 / Create an account to join the discussion.
james.q.zhu
Follow / 7 Feb 2018 at 7:55am / SQL Navigator
Latest post by on 11 Feb 2018 at 5:59am

SQL Navigator 7.4 cann't commit to SVN

Expand content
problem desc: 1、 do 'check out' a package 2、SQL Navigator generate 2 files for this package 3、do 'Check in' 4、you can find SQL Navigator exeute svn 'add' command but not...

problem desc:

1、 do  'check out'  a package

2、SQL Navigator generate 2 files for this package

3、do 'Check in'

4、you can find SQL Navigator exeute svn 'add'  command but not execute 'commit '  command  

so the two package files cann't find in SVN Server. 

anyone know this issue?

Production Version: SQL Navigator 2017 Trial Edition(SQL Navigator 7.4 Trial)

1802 4 / Create an account to join the discussion.
drastogi
Follow / 29 Jan 2018 at 3:26pm / SQL Navigator
Latest post by on 30 Jan 2018 at 5:38pm

SQLNAV 7.4 64-Bit Random crash

Expand content
SQL Navigator 7.4 64-bit on Windows Enterprise 10 64-bit is crashing with the following error: Control 'dpCodeAssistant' has no parent window. Has anyone seen this error or has a suggestion...

SQL Navigator 7.4 64-bit on Windows Enterprise 10 64-bit is crashing with the following error:

Control 'dpCodeAssistant' has no parent window. 

Has anyone seen this error or has a suggestion to resolve? Thanks. 

1809 2 / Create an account to join the discussion.
Vincent Liu
Follow / 17 Aug 2016 at 7:53am / SQL Navigator
Latest post by on 29 Jan 2018 at 12:35pm

SQL Navigator 7.3 is released

Expand content
Dear all, We are very pleased to announce that SQL Navigator version 7.3 has been released. Thank you all for supporting the product and we really appreciate feedbacks and suggestions from you. New...

Dear all,

We are very pleased to announce that SQL Navigator version 7.3 has been released. Thank you all for supporting the product and we really appreciate feedbacks and suggestions from you.

New features in SQL Navigator 7.3:

  • Connection Category Color - Optionally assign a connection to a category color in the Oracle Logon Dialog. Possible categories could be: development, test or production. You could create your own categories and assign colors as appropriate. The color is displayed in the following places in SQL Navigator: the connection entry in the Session toolbar, the border of windows belonging to the connection, task bar icons of windows belonging to the connection and tab icons of the Code Editor window.

  • New Online Search Dialog - When you double click on an error message which contains an Oracle error code, you can now select the online search engine to use to receive detailed Oracle error information from. Options include Google, Online Knowledge Base (maintained by Dell Support), Online Knowledge Xpert (maintained as Toad World Wiki) and Toad World Search.

  • Team Coding - The settings and backend repository are now compatible with Toad for Oracle 12.7. Git is now a supported Version Control System. There are new interfaces to administer Team Coding and manage Team Coding Objects.

  • Windows 10 - Support for Windows 10

     

The complete list of resolved issues and enhancements (for 7.3 release):
http://www.toadworld.com/products/sql-navigator/w/wiki/10945.sql-navigator-resolved-issues-and-enhancements.aspx

Product documentation:
https://support.quest.com/sql-navigator-for-oracle/release-notes-guides 

Download the newest release (upgrade for existing users):
https://support.quest.com/sql-navigator-for-oracle/download-new-releases 

Download trial of the latest release (free trial for new users):
https://www.quest.com/registert/54629/ 

Regards,

SQL Navigator Team

5702 2 / Create an account to join the discussion.
krmckee
Follow / 24 Jan 2018 at 1:47pm / SQL Navigator
Latest post by on 29 Jan 2018 at 6:17am

How to start using SQL Navigator and SVN/Subversion

Expand content
Hi - I recently downloaded a trial of SQL Navigator 7.4 and am trying to integrate it with my SVN server. Here's what I've done so far I connected to one of my databases, then I went to the Team...

Hi - I recently downloaded a trial of SQL Navigator 7.4 and am trying to integrate it with my SVN server.  Here's what I've done so far

I connected to one of my databases, then I went to the Team Coding menu and selected Team Coding Manager

I went to the VCS tab, right clicked and chose Configure

I specified the following options for SVN

(Servername blanked for security reasons, but my server name is in the settings)

I then went back to the Team Coding menu and chose Provider Logon

where it prompted me for my username/password, and then it shows

so I believe I'm connecting to my SVN server fine.

Now what I want to be able to do is take all of my database elements (table DDL, functions, stored procedures, etc) and check them all into SVN so that I can start doing version control.  This is where I get stuck, as there doesn't seem to be any way to do this?  Are my expectations wrong, or am I just missing something?  Any help would be greatly appreciated.

Thanks

1915 1 / Create an account to join the discussion.
virajdodanwala
Follow / 25 Jan 2018 at 12:53pm / SQL Navigator

SQL Navigator 7.4 - Team Coding - Error when try to compare changes...

Expand content
Dears, I am new to this GIT version controlling system and i am trying to use SQL Navigator 7.4 with GIT version controlling system to maintain DB changes. Initial configuration i have done and changes...

Dears, 

I am new to this GIT version controlling system and i am trying to use SQL Navigator 7.4 with GIT version controlling system to maintain DB changes.

Initial configuration i have done and changes are properly pushing to Bitbucket also. But when i try to compare the change of the Database object ( ex: Table change) with the VCS through SQL navigator

( Menu path is Team Coding -> Team Coding Manager . Then expand the DB object and right click on the Table -> Compare Content)

When i select to compare . its giving below error message.

If anyone can help/ Guide to fix this, it would be great.

Unanswered 1113 0 / Create an account to join the discussion.
Fsilva
Follow / 7 Sep 2009 at 2:19pm / SQL Navigator
Latest post by on 22 Dec 2017 at 4:07pm

Bookmarks and formatter

Expand content
Hi Is there any way to keep the bookmarks between formating (it cleans the bookmarks even if the line didn't changed)? thanks Filipe

Hi

Is there any way to keep the bookmarks between formating (it cleans the bookmarks even if the line didn't changed)?

thanks

Filipe

6467 4 / Create an account to join the discussion.
martin_goblet
Follow / 2 Nov 2017 at 8:07am / SQL Navigator
Latest post by on 24 Nov 2017 at 8:32am

Error is not more shown (7.3 32 bit, Win 7 64 pro)

Expand content
Hi I just tried to delete a table an forgot that there is a delete cascade on it. instead of getting the error, I got this : Regards Martin

Hi

I just tried to delete a table an forgot that there is a delete cascade on it.  instead of getting the error, I got this :

Regards

Martin

2173 2 / Create an account to join the discussion.
martin_goblet
Follow / 15 Nov 2017 at 9:43am / SQL Navigator
Latest post by on 23 Nov 2017 at 2:49am

Crash when closing a session (7.3 32 bit, Win 7 64 pro)

Expand content
Hi Sometimes SQL NAv crashes when I close a session : Log files : SQL Navigator 7.3.0.zip Regards Martin

Hi

Sometimes SQL NAv crashes when I close a session :

Log files :

SQL Navigator 7.3.0.zip

Regards

Martin

2318 1 / Create an account to join the discussion.
Bill
Follow / 14 Nov 2017 at 6:49pm / SQL Navigator
Latest post by on 20 Nov 2017 at 1:12pm

Insert or Update if exists from a staging table to another table

Expand content
Hello I have a process that runs daily that pulls down a csv file imports it and does some conversion and puts that converted data into a staging table. I then want a plsql script I can automate...

Hello

I have a process that runs daily that pulls down a csv file imports it and does some conversion and puts that converted data into a staging table. 

I then want a plsql script I can automate along with the other process to insert or update the data from the Staging Table to the main table.

I will have several hundred thousand records per day and approximately 25% of them will be data that needs to be updated.

Example

Maintable Contains

COOPID,ACCOUNTID,DATETIME,VALUE
HSCE,300001,9/10/2017 5:00:00.0000000 AM,0.48
HSCE,300001,9/10/2017 6:00:00.0000000 AM,5
HSCE,300001,9/10/2017 7:00:00.0000000 AM,1
HSCE,300001,9/10/2017 8:00:00.0000000 AM,2.3
HSCE,300001,9/10/2017 9:00:00.0000000 AM,1.8
HSCE,300001,9/10/2017 10:00:00.0000000 AM,3
HSCE,300001,9/10/2017 11:00:00.0000000 AM,2.3

StagingTable Contains

COOPID,ACCOUNTID,DATETIME,VALUE
HSCE,300001,9/10/2017 5:00:00.0000000 AM,3.8
HSCE,300001,9/10/2017 6:00:00.0000000 AM,2.6
HSCE,300001,9/10/2017 7:00:00.0000000 AM,1.2
HSCE,300001,9/11/2017 8:00:00.0000000 AM,6.2
HSCE,300001,9/11/2017 9:00:00.0000000 AM,3.3
HSCE,300001,9/11/2017 10:00:00.0000000 AM,2.5
HSCE,300001,9/11/2017 11:00:00.0000000 AM,6.6

I want a script that will automatically put in the new 9/11 data into the MainTable and update the MainTable with the new values for 9/10 This is a small size example for 1 account but the file and table both contain lots of accounts for many years worth of data.

I looked at Merge and other postings however all seem to use Dual instead of looking at 2 tables.

Thanks for the help

2736 6 / Create an account to join the discussion.
Reise
Follow / 23 Oct 2017 at 10:44am / SQL Navigator
Latest post by on 7 Nov 2017 at 9:54am

Formmater issue with ANSI SQL

Expand content
I'm troubling making the formmater align keywords in ANSI SQL. In the higlight part the join and on keyword should be aligned with the from I want to make it like this Any help is great...

I'm troubling making the formmater align keywords in ANSI SQL.

In the higlight part the join and on keyword should be aligned with the from

I want to make it like this

Any help is great...

Unanswered 2290 2 / Create an account to join the discussion.
martin_goblet
Follow / 8 Sep 2016 at 9:43am / SQL Navigator
Latest post by on 31 Oct 2017 at 6:10am

Statement still executes, even after a STOP !

Expand content
Hi When I run a SELECT with a related database (@...), I'm not able to stop this one. It still runs to the end. Regards Martin

Hi

When I run a SELECT with a related database (@...), I'm not able to stop this one.  It still runs to the end.

Regards

Martin

3966 9 / Create an account to join the discussion.
chdodso
Follow / 19 Oct 2017 at 2:40pm / SQL Navigator

Extract DDL Missing ;

Expand content
We've just upgraded to SQL Navigator 7.3 (7.3.0.4294) I extract the DDL for a view to include the grants. When I try to run the script I get ORA-00933: SQL command not properly ended. Troubleshooting...

We've just upgraded to SQL Navigator 7.3 (7.3.0.4294)

I extract the DDL for a view to include the grants.  When I try to run the script I get ORA-00933: SQL command not properly ended.

Troubleshooting show that I either have to take all the grant clauses out of the script or put an ";" at the end of the view creation portion manually.

1340 0 / Create an account to join the discussion.
ashmelev
Follow / 18 Oct 2017 at 6:18pm / SQL Navigator

Unable create a view using Oracle 12c features

Expand content
Here'a sample query I've created that uses WITH clause with a function and some sub-query (my real query is much more complex, but has similar structure). --CREATE VIEW TMP_ABC AS WITH FUNCTION...

Here'a sample query I've created that uses WITH clause with a function and some sub-query (my real query is much more complex, but has similar structure).

--CREATE VIEW TMP_ABC AS

WITH
FUNCTION abc (p_val NUMBER) RETURN VARCHAR2 IS
vret VARCHAR2 (100);
BEGIN
SELECT LPAD (' ', p_val, 'z') INTO vret FROM DUAL;

RETURN vret;
END;
gen AS (SELECT ROWNUM rn FROM DUAL CONNECT BY LEVEL < 10)
SELECT gen.rn, abc (rn) abc
FROM gen;

With the first line commented out, the query runs fine from SQL Navigator 7.4, formatter is able to format it, but if I uncomment the first line and attempt to create a view based on this query I get an error message.

line 1: ORA-06553: PLS-103: Encountered the symbol "end-of-file" when expecting one of the following:

:= ; not null default character

or

line 12: ORA-00900: invalid SQL statement

Using SQL Nav 7.4 64-bit, Oracle 12c client 64 bit and 12c database.

Tried Oracle SQL Developer and the view creation script works just fine.

1217 0 / Create an account to join the discussion.
saman
Follow / 10 Nov 2012 at 1:31am / SQL Navigator
Latest post by on 3 Oct 2017 at 6:14am

i need a key authorization for sqlnavigator 6.7

Expand content
I downloaded a trial version of sqlnavigator 6.7 , they sent me a mail with license key but it was expired. Please can anybody help me??? Thanks Saman

I downloaded a trial version of sqlnavigator 6.7 , they sent me a mail with license key but it was expired. Please can anybody help me???
Thanks
Saman

10924 7 / Create an account to join the discussion.
Reise
Follow / 28 Sep 2017 at 2:57pm / SQL Navigator
Latest post by on 2 Oct 2017 at 10:52am

Formmater options to not stack parameters in internal functions?

Expand content
Is there an option on formmatter options to prevent the parameters of internal functions to go the the next line and get stacked? I'm using SQL Navigator 7.3.0.4294 This is what I get: This...

Is there an option on formmatter options to prevent the parameters of internal functions to go the the next line and get stacked?

I'm using SQL Navigator 7.3.0.4294

This is what I get:

This is what I wanted:

SELECT NVL (SUBSTR (RTRIM (a3.VALUE), 1, 25), 'n/a')

2352 2 / Create an account to join the discussion.